Deutsch
Français
STORMY 437(S) | 4 inch submersible sand pump with agitator and three phase 3,7 kW motor
Item No.
PRST437S-1
The PRORIL STORMY series of wear-resistant electric submersible sand pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The sediment is forced loose with the agitator, after which a mix of water and sand can be pumped
Description
The PRORIL STORMY series of wear-resistant electric submersible sand pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The sediment is forced loose with the agitator, after which a mix of water and sand can be pumped out.
This heavy duty submersible agitator pump with closed strainer creates a horizontal underwater flow, it can run dry without problems and is suitable for pumping sand and other high density liquids.
This heavy duty submersible agitator pump with closed strainer creates a horizontal underwater flow, it can run dry without problems and is suitable for pumping sand and other high density liquids.
| STORMY 337S | STORMY 437S | |
|---|---|---|
| Discharge outlet | 3" BSP thread | 4" BSP thread |
| Motor output | 3,7 kW | 3,7 kW |
| Phase / voltage | 3 phase / 400V 50 Hz | 3 phase / 400V 50 Hz |
| Max. flow | 78 m3/h (1300 l/min) | 108 m3/h (1800 l/min) |
| Max. head | 15 mwc | 14 mwc |
| Free passage | 25 mm | 25 mm |
| Dimensions D x H | Ø 382 mm x 793 mm | Ø 382 mm x 814 mm |
| Weight w/o cable | 115 kg | 115 kg |
| Cable length | 20 m | 20 m |
Also available with open stand (STORMY 337(P) & STORMY 437(P))
Downloads