Deutsch
Français
STORMY 4110(P) | 4 inch submersible slurry pump with agitator and three phase 11 kW motor
Item No.
PRST4110P-1
The PRORIL STORMY series of abrasion resistant electric submersible slurry pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The agitator forces solids loose, after which a mix of water and slurry can be pumped out.
This
This
Description
The PRORIL STORMY series of abrasion resistant electric submersible slurry pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The agitator forces solids loose, after which a mix of water and slurry can be pumped out.
This heavy duty submersible agitator pump with semi-open strainer creates a vertical underwater flow, it can run dry without problems and is well suited for pumping abrasive liquids such as slurry and sand.
This heavy duty submersible agitator pump with semi-open strainer creates a vertical underwater flow, it can run dry without problems and is well suited for pumping abrasive liquids such as slurry and sand.
| STORMY 4110P | STORMY 6110P | |
|---|---|---|
| Discharge outlet | 4" BSP thread | 6" BSP thread |
| Motor output | 11 kW | 11 kW |
| Phase / voltage | 3 phase / 400V 50 Hz | 3 phase / 400V 50 Hz |
| Max. flow | 186 m3/h (3100 l/min) | 222 m3/h (3700 l/min) |
| Max. head | 26 mwc | 22 mwc |
| Free passage | 25 mm | 35 mm |
| Dimensions D x H | Ø 479 mm x 901 mm | Ø 479 mm x 913 mm |
| Weight w/o cable | 191 kg | 192 kg |
| Cable length | 20 m | 20 m |
Also available with strainer (STORMY 4110(S) & STORMY 6110(S))
Downloads