Deutsch
Français
STORMY 6110(S) | 6 inch submersible sand pump with agitator and three phase 11 kW motor
Item No.
PRST6110S-1
The PRORIL STORMY series of wear-resistant electric submersible sand pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The sediment is forced loose with the agitator, after which a mix of water and sand can be pumped
Description
The PRORIL STORMY series of wear-resistant electric submersible sand pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The sediment is forced loose with the agitator, after which a mix of water and sand can be pumped out.
This heavy duty submersible agitator pump with closed strainer creates a horizontal underwater flow, it can run dry without problems and is suitable for pumping sand and other high density liquids.
This heavy duty submersible agitator pump with closed strainer creates a horizontal underwater flow, it can run dry without problems and is suitable for pumping sand and other high density liquids.
| STORMY 4110S | STORMY 6110S | |
|---|---|---|
| Discharge outlet | 4" BSP thread | 6" BSP thread |
| Motor output | 11 kW | 11 kW |
| Phase / voltage | 3 phase / 400V 50 Hz | 3 phase / 400V 50 Hz |
| Max. flow | 186 m3/h (3100 l/min) | 222 m3/h (3700 l/min) |
| Max. head | 26 mwc | 22 mwc |
| Free passage | 25 mm | 35 mm |
| Dimensions D x H | Ø 479 mm x 910 mm | Ø 479 mm x 922 mm |
| Weight w/o cable | 199 kg | 200 kg |
| Cable length | 20 m | 20 m |
Also available with open stand (STORMY 4110(P) & STORMY 6110(P))
Downloads