Deutsch
Français
STORMY 6150(S) | 6 inch submersible sand pump with agitator and three phase 15 kW motor
Item No.
PRST6150S-1
The PRORIL STORMY series of wear-resistant electric submersible sand pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The sediment is forced loose with the agitator, after which a mix of water and sand can be pumped
Description
The PRORIL STORMY series of wear-resistant electric submersible sand pumps are fitted as standard with an ACrS high chrome steel impeller, agitator and wear plate. The sediment is forced loose with the agitator, after which a mix of water and sand can be pumped out.
This heavy duty submersible agitator pump with closed strainer creates a horizontal underwater flow, it can run dry without problems and is suitable for pumping sand and other high density liquids.
This heavy duty submersible agitator pump with closed strainer creates a horizontal underwater flow, it can run dry without problems and is suitable for pumping sand and other high density liquids.
| STORMY 6150(S) | STORMY 6150L(S) | |
|---|---|---|
| Discharge outlet | 6" BSP thread | 6" BSP thread |
| Motor output | 15 kW | 15 kW |
| Phase / voltage | 3 phase / 400V 50 Hz | 3 phase / 400V 50 Hz |
| Max. flow | 258 m3/h (4300 l/min) | 330 m3/h (5500 l/min) |
| Max. head | 30,5 mwc | 23 mwc |
| Free passage | 35 mm | 35 mm |
| Dimensions D x H | Ø 479 mm x 922 mm | Ø 479 mm x 922 mm |
| Weight w/o cable | 208 kg | 208 kg |
| Cable length | 20 m | 20 m |
Also available with open stand (STORMY 6150(P) & STORMY 6150L(P))
Downloads